Specifications
– Volume: 37.5 liters
– Liquid level min.: 20 mm
– Liquid level max.: 114 mm
– Interior dimensions: width 602 x height 150 x depth 482 mm
– Exterior dimensions: width 868 x height 375 x depth 554 mm
– Temperature sensor: digital temperature sensor, mounted on the outside of the bath
– Temperature: setting ºC/ºF
– Working temperature range: at least 5 o C aboveambient temperature to 100oC (with cover, depending on ambient pressure)
– Setting temperature range: +10 to 100oC
– Setting accuracy temperature: 0.1oC
– Calibration: 2-point calibration
– Controller: intuitive 3.5″ colour graphic display with touch screen
– Controller: digital display of set and actual temperature and of (remaining) programme time
– Temperature control:
+ Two-stage safety system to prevent overtemperature
+ Individually adjustable overtemperature alarm, visual and acoustic
+ Independent temperature limiter to switch off the heating in case of failure
– Microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
– Heating: corrosion-proof large-area heating on the outside of the interior
– Drain system: innovative drain system – easy to empty
– Timer: digital timer from 1 min. up to 99 hours 59 min., visual and acoustic
– Deep stainless steel tank cage (stainless steel W. St. 1-4301), no edges for easy cleaning, includes drain pipe right in the middle of the tank (does not affect installation)
– Stainless steel tank exterior
– Installation: The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
– Ambient temperature: 5 – 40oC
– Humidity: max. 80% rh, non-condensing
– Voltage: 230 V, 50/60 Hz
– Power: approx. 2800 W
– Standard units are safety-approved and bear the test marks: CE, EAC
Included
+ Stainless steel gable cover
Optional
+ Flat stainless steel cover with concentric ring sets for ring set openings: 8 openings / 107 mm diameter, code: B48806
+ Special flat stainless steel cover with openings and concentric ring sets; 8 openings, Ø 107 mm (only in combination with CPM650), code: B48809
+ Perforated bottom shelf, reversible for 2 heights (30 or 60 mm), stainless steel, code: B50771
+ Pump device,code: CPM650 (Please do not forget to order the installation and connection set, B48813)
+ Installation and connection set for pump device CPM650 (incl. mounting bars for all different bath sizes), code: B48813
+ Shaking device for water baths incl. support frame, shaking frequency 30 – 150 strokes per minute, code: SV3550
+ Support basket with perforated mounting shelf, code: B48815
+ Calibration at Memmert factory for a freely selectable temperature value, code: D00109
+ Calibration at Memmert factory for a temperature value: +37°C, code: D00123
+ IQ/OQ documents, code: D00125
