Specifications:
– Volume: 53 liters
– Interior dimensions: width 400 x height 400 x depth 330 mm
– Exterior dimensions: width 585 x height 784 x depth 514 mm
– Setting temperature range: 20 – 80ºC
– Working temperature range: at least 5 above ambient temperature to +80°C
– Setting accuracy temperature: 0.10C
– Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
– ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
– Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
– Function SetpointWAIT: the process time does not start until the set temperature is reached
– Calibration: three freely selectable temperature values
– Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones
– Sterilisation: fixed sterilisation programme (4 hours/160°C) for sterilisation of working chamber, not for sterilising the load
– Natural convection
– Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap
– Documentation: programme stored in case of power failure
– Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 200C above the set temperature above nominal temperature
– Temperature control: overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
– AutoSAFETY: additionally integrated over- and undertemperature monitor “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
– Autodiagnostic system: for fault analysis
– Alarm: visual and acoustic
– Interior: easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
– Maximum of grid: 4
– Maximum loading of chamber: 80 kg
– Maximum loading per grid: 20 kg
– Works calibration certificate: incl. works calibration certificate for +37°C
– Door: fully insulated stainless steel door with 2-point locking
– Door: inner glass door
– Internals: 1 stainless steel grid(s), electropolished
– Textured stainless steel casing, rear zinc-plated steel
– Voltage: 230 V, 50/60 Hz, 1000 W
– Ambient temperature: 5 – 400C
– Humidity: max. 80% rh, non-condensing
Included:
+ Works calibration certificate: incl. works calibration certificate for 370C (Memmert)
+ Stainless steel grid, 1pc
+ Manual
