Specifications:
– Volume: 97 liters
– Chamber size: Ø 400 x height 660 mm
– Outer dimensions / weight: W620 x D720 x H1000 mm / 88 kg
– Temperature (Max. press.): 100 – 137 0 C (0.250 Mpa)
– Sterilization time: 0 minutes – 48 hours 0 minutes
– Dissolution temperature / time: 40 – 99 0 C / 0 minutes – 48 hours0minutes
– Warming temperature / time: 40 – 60 0 C / 0 minutes – 48 hours0minutes
Incorporates the parts not easily deteriorate over time: To avoid a running cost piling up due to the parts easily deteriorate over time, incorporates the lid gasket with steam resistant, the heater element made of stainless steel etc. so the parts last long time.
– Rapid cooling fan as standard: Cools the loads after cycle to shorten the time until unloading
– Data logging system (Option): You can take the temperature, pressure, and time during operation into an optional software “ALP- LOGGER” by connecting between the unit and a PC. The data are showed “Temperature (Pressure) – Time” diagram, can be
printed, and exported to Microsoft Excel®.
– Steam-flush pressure-pulse (SFPP): Removes air from the load rapidly by repeatedly alternating a steam flush and a pressure pulse above atmospheric pressure. Optimum to sterilize challenging loads.
– Available in plenty programs: In addition to five prescribed programs depending on the load such as LIQUID, SOLIDS, and WASTE, etc. you can set the sterilization temperature, time, and cooling method to save and invoke them up to ten memories.
– Interactive Liquid Crystal Display: The settings etc. on an enlarged screen as shown below. One – touch switching between the detailed and enlarged screen.
– Corresponds to IQ/OQ in GMP, GLP: We provide IQ/OQ documentations as an option.
– Safety device: Lid interlock, Lid opening/closing detection, Water lack prevention, Over temperature prevention, Over pressure prevention, Sensor breakage detection, Memory backup, Leakage breaker, Pressure safety valve.
– Power supply: AC 230 V, 19 A
Included:
+ Wire basket Ø 380 x 300 mm, 2 pcs
+ Drain bottle, 1 bottle
Options:
+ Floating sensor
+ Printer
+ Automatic water supply system with pre-heat system.
+ Serial communication port RS-232C and Data logging system
+ Exhaust air filter
