Specifications
– Volume: 56 liters
– Interior dimensions: width 400 x height 425 x depth 330 mm
– Exterior dimensions: width 559 x height 795 x depth 521 mm
– Stainless steel grid standard: 1 pc
– Maximum number of grids: 5
– Working temperature range: +5ºC above ambient temperature up to 50ºC
– Standard sterilisation programme: 60 minutes at 180°C (without removing the sensors)
– Setting accuracy: 0.1ºC
– Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
– Temperature fluctuations with time at 37ºC: ± 0.1 K
– Temperature variation in chamber at 37ºC: ± 0.3 K
– Humidity control: Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
– Setting range active humidity control (with option K7): 40 to 97 % rh and rh-Off
– Setting accuracy humidity: 0.5% rh
– Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
– Adjustment range CO2: 0 – 20%
– Variation in time: ± 0.2%
– Setting accuracy: 0.1%
– ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
– Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
– Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
– Function SetpointWAIT: the process time does not start until the set temperature is reached
– Adjust parameters: temperature (ºC or ºF), CO2 concentration, time program, time zone
– Interface: Ethernet LAN, USB
– Documentation: programme stored in case of power failure
– Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
– AutoSAFETY: additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
– Autodiagnostic system: integral fault diagnostics for temperature and CO2
– Alarm: visual and acoustic
– Large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
– Door: fully insulated stainless steel door with 2-point locking (compression door lock)
– Door: inner glass door with opening (8 mm Ø) to take gas sample
– Stainless steel interior: material 1.4301 (ASTM 304), corrosion resistant.
– Textured stainless steel casing, rear zinc-plated steel
– Multiple overtemperature protection: electronic temperature monitoring TWW/TWB (protection class 3.1) and mechanical thermal limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY function automatically adjusts to the set value within a freely adjustable tolerance range. Independent setting of MIN/MAX value for overheating warning and also for all other parameters such as humidity, CO2 concentration
– Internal data logger with a storage capacity of at least 10 years
– Voltage: 230 V, 50/60 Hz
– Power consumption: approx. 1100 W
– Ambient temperature: 10 – 35ºC
– Humidity: max. 70% rh, non-condensing
Included:
+ Stainless steel grid standard: 1 pc
+ Stainless steel water dish: 1 pc
+ Works calibation certificate: incl. works calibration certificate (measuring point chamber centre) at +37°C, 5 % CO2 for standard units
+ Manuals
