Specifications
– Volume: 23.1 liters
– Liquid level min.: 20 mm
– Liquid level max.: 164 mm
– Interior dimensions: width 472 x height 200 x depth 267 mm
– Exterior dimensions: width 749 x height 425 x depth 349 mm
– Temperature sensor: digital temperature sensor, mounted on the outside of the bath
– Temperature: setting ºC/ºF
– Working temperature range: at least 5°C above ambient temperature to 100°C (with cover, depending on ambient pressure)
– Setting temperature range: +10 to 100oC
– Setting accuracy temperature: 0.1oC
– Calibration: 2-point calibration
– Controller: intuitive 3.5″ colour graphic display with touch screen
– Controller: digital display of set and actual temperature and of (remaining) programme time
– Temperature control:
+ Two-stage safety system to prevent overtemperature
+ Individually adjustable overtemperature alarm, visual and acoustic
+ Independent temperature limiter to switch off the heating in case of failure
– Microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
– Heating: corrosion-proof large-area heating on the outside of the interior
– Drain system: innovative drain system – easy to empty
– Timer: digital timer from 1 min. up to 99 hours 59 min., visual and acoustic
– Interior: Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy cleaning incl. central drain (no disturbing installations)
– Installation: The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
– Ambient temperature: 5 – 40oC
– Humidity: max. 80% rh, non-condensing
– Voltage: 230 V, 50/60 Hz
– Power: approx. 1420 W
– Standard units are safety-approved and bear the test marks: CE, EAC
Included
+ Stainless steel gable cover
Optional
+ Flat stainless steel cover with openings and concentric ring sets; 6 openings, Ø 107 mm, code: B65807
+ Perforated bottom shelf, reversible for 2 heights (30 or 60 mm), stainless steel, code: B65815
+ Pump device, code: P7
+ Shaking device for water baths including mounting frame, shaking frequency 35 – 150
strokes per minute, code: SV1524
+ Holding basket with perforated fixing plate (stainless steel) with hole grid for holding clamps for Erlenmeyer flasks (use of test tube racks not possible), code: B66308
