Specifications
– Volume: 7.5 liters
– Liquid level min.: 40 mm
– Liquid level max.: 114 mm
– Interior dimensions: width 277 x height 150 x depth 217 mm
– Exterior dimensions: width 479 x height 375 x depth 289 mm
– Temperature sensor: digital temperature sensor, mounted on the outside of the bath
– Temperature: setting ºC/ºF
– Working temperature range: at least 5 o C aboveambient temperature to 100oC (with cover, depending on ambient pressure)
– Setting temperature range: +10 to 100oC
– Setting accuracy temperature: 0.1oC
– Calibration: 2-point calibration
– Controller: intuitive 3.5″ colour graphic display with touch screen
– Controller: digital display of set and actual temperature and of (remaining) programme time
– Temperature control:
+ two-stage safety system to prevent overtemperature
+ Individually adjustable overtemperature alarm, visual and acoustic
+ Independent temperature limiter to switch off the heating in case of failure
– Microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
– Heating: corrosion-proof large-area heating on the outside of the interior
– Drain system: innovative drain system – easy to empty
– Timer: digital timer from 1 min. up to 99 hours 59 min., visual and acoustic
– Interior: Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy cleaning incl. central drain (no disturbing installations)
– Installation: The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
– Ambient temperature: 5 – 40oC
– Humidity: max. 80% rh, non-condensing
– Voltage: 230 V, 50/60 Hz
– Power: approx. 1000 W
– Standard units are safety-approved and bear the test marks: CE, EAC
Included
+ Stainless steel gable cover
Optional
+ Flat stainless steel cover with openings and concentric ring sets; 3 openings, Ø 87 mm, code: B48804
+ Special stainless steel cover with concentric holes and ring set (3 holes/Ø 87 mm) for combination with (CPM650 circulation pump), code: B48807
+ Perforated bottom shelf, reversible for 2 heights (30 or 60 mm), stainless steel, code: B50767
+ Pump device, code: CPM650 (requires additional B48813 installation kit)
+ Installation and connection set for pump device CPM650 (incl. mounting bars for all different bath sizes), code: B48813
+ Calibration at Memmert factory for a freely selectable temperature value, code: D00109
+ Calibration at Memmert factory for a temperature value: +37°C, code: D00123
+ IQ/OQ documents, code: D00125