Specifications
– Volume: 17.1 liters
– Liquid level min.: 20 mm
– Liquid level max.: 114 mm
– Interior dimensions: width 482 x height 150 x depth 277 mm
– Exterior dimensions: width 749 x height 375 x depth 349 mm
– Temperature sensor: digital temperature sensor, mounted on the outside of the bath
– Temperature: setting ºC/ºF
– Working temperature range: at least 5°C above ambient temperature to 100°C (with cover, depending on ambient pressure)
– Setting temperature range: +10 to 100oC
– Setting accuracy temperature: 0.1oC
– Calibration: 2-point calibration
– Controller: intuitive 3.5″ colour graphic display with touch screen
– Controller: digital display of set and actual temperature and of (remaining) programme time
– Temperature control:
+ Two-stage safety system to prevent overtemperature
+ Individually adjustable overtemperature alarm, visual and acoustic
+ Independent temperature limiter to switch off the heating in case of failure
– Microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
– Heating: corrosion-proof large-area heating on the outside of the interior
– Drain system: innovative drain system – easy to empty
– Timer: digital timer from 1 min. up to 99 hours 59 min., visual and acoustic
– Deep stainless steel tank cage (stainless steel W. St. 1-4301), no edges for easy cleaning, includes drain pipe right in the middle of the tank (does not affect installation)
– Installation: The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
– Ambient temperature: 5 – 40oC
– Humidity: max. 80% rh, non-condensing
– Voltage: 230 V, 50/60 Hz
– Power: approx. 1420 W
– Standard units are safety-approved and bear the test marks: CE, EAC
Included
+ Stainless steel gable cover
Optional
+ Flat stainless steel cover with openings and concentric ring sets; 6 openings, Ø 107 mm, code: B65807
+ Perforated bottom shelf, reversible for 2 heights (30 or 60 mm), stainless steel, code: B65815
+ Pump device, code: P7
+ Shaking device for water baths including mounting frame, shaking frequency 30 – 150 strokes per minute, code: SV1524
+ Holding basket with perforated fixing plate (stainless steel) with hole grid for holding
clamps for Erlenmeyer flasks (use of test tube racks not possible), code: B66308
