Specifications:
– Volume: 53 liters
– Interior dimensions: width 400 x height 400 x depth 330 mm
– Exterior dimensions: width 585 x height 784 x depth 514 mm
– Stainless steel grid standard: 1 pc
– Maximum number of grids: 4
– Maximum loading per grid: 20 kg
– Maximum loading of chamber: 80 kg
– Operating temperature range: at least 10ºC above ambient to 300ºC
– Setting accuracy temperature: 0.1ºC up to 99.9ºC; 0.5°C from 100°C
– Temperature sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit
– Language settings: German, English, French, Spanish, Polish, Czech, Hungarian
– ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
– Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days.
– Function SetpointWAIT: the process time does not start until the set temperature is reached
– Calibration: three freely selectable temperature values
– Adjust parameters: temperature (ºC or ºF), fan speed, air convection door position, time program, time zone
– Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
– Documentation: programme stored in case of power failure
– Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 200C above the set temperature above nominal temperature
– Autodiagnostic system: for fault analysis
– Interfaces: Ethernet
– Door: fully insulated stainless steel door with 2-point locking.
– Textured stainless steel casing, scratch resistant, hard and durable, rear zinc-plated.
– Internal data logger with a storage capacity at least 10 years
– Voltage: 230 V, 50/60 Hz
– Power consumption: approx. 2000 W
– Ambient temperature: 5 – 40ºC
– Humidity: max. 80% RH, non-condensation
Included:
+ Works calibration certificate: Calibration at 160ºC (Memmert)
+ Stainless steel grid standard, 1 pc
+ Manual
