Specifications
– Volume: 29 liters
– Setting temperature range: 20 – 200ºC
– Working temperature range: min. 5ºC above ambient up to 200ºC.
– Setting accuracy temperature: up to 99.9ºC: 0.1/ from 100ºC: 0.5
– Temperature variation in time: ≤ ± 0.3 K
– Temperature uniformity (surface) at 160ºC/ 20 mbar: ≤ ± 2.5 K
– Temperature sensor: temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
– Vacuum range: 5 – 1100 mbar
– Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
– Permitted final vacuum: 0.01 mbar
– Maximum leakage rate: 0.01 bar/h
– Pump control: speed control, optimised rinsing procedures for the pump membranes as well as signal output for pump ON/OFF
– Connection: Vacuum connection with small flange DN16, and gas inlet with fresh air supply
– Adjustable parameters: temperature (ºC or ºF), pressure (vacuum), time programme, time zone
– Language setting: German, English, Spanish, French, Polish, Czech, Hungarian, Italian
– ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
– Timer: adjustable from 1 minute to 99 days
– Function setpointWAIT: the process time does not start until the set temperature is reached
– Interface: Ethernet LAN, USB
– Documentation: programme stored in case of power failure
– Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
– Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
– AutoSAFETY: additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
– Autodiagnostic system: integral fault diagnostics for temperature control
– Alarm: visual and acoustic
– fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf
– Thermoshelves: 1 connection for thermoshelves in the rear
– Max. number of internals: 2
– Internals: 1 thermoshelf of aluminim, material 3.3547 (ASTM B209) with integrated large-area heating
– Material: Hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404
– Textured stainless steel casing, rear zinc-plated steel
– Door: full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
– Interior dimensions: width 385 x height 305 x depth 250 mm
– Exterior dimensions: width 550 x height 607 x depth 400 mm
– Max. loading per thermoshelf: 20 kg
– Max. loading of chamber: 40 kg
– Ambient temperature: 5 – 400C
– Humidity: maximum 80% RH, non-condensing
– Voltage: 230 V, 50/60 Hz
– Power consumption: approx. 820 W
Included accessories :
+ Works calibration certificate: for +160°C at 20 mbar pressure for each supplied thermoshelf together with the vacuum oven
+ Thermoshelf of aluminim, 1 pc
+ Manual
Options:
+ Vacuum pump, model: PMP29
